Principal Investigator
Ehsan Madadi, Ph.D.
Assistant Professor of Mechanical and Aerospace Engineering
Ph.D., Iowa State University. Postdoctoral fellow, The University of Texas at Austin. Faculty at CSULB since 2020.
People
Current members, alumni and visiting scholars of the MCF2 Lab.
Principal Investigator
Assistant Professor of Mechanical and Aerospace Engineering
Ph.D., Iowa State University. Postdoctoral fellow, The University of Texas at Austin. Faculty at CSULB since 2020.
Alumni
37 alumni and visiting scholars, 13 with a thesis supervised in the lab. First positions after the lab include:
2026
M.S. Mechanical Engineering
Computational analysis of acoustic body force in inhomogeneous fluids
2026
M.S. Aerospace Engineering
Quadrature-based moment methods for nonlinear Fokker–Planck equations
2025
M.S. Mechanical Engineering
Extension of the Battelle two-curve method for fracture control in dense-phase carbon dioxide pipelines
Mechanical Engineer, SPEC Services, Inc.
2025
M.S. Aerospace Engineering
An investigation of the DSMC method's computing efficiency and velocity distributions in rarefied gas flow simulations
2022
M.S. Mechanical and Aerospace Engineering
Computational study on the flame and extinction behavior of a high enthalpy air slab
Virgin Galactic
2026
M.S., Open University
2025
M.S.
2024
M.S.
Effect of RANS model choice on the simulation of Sandia flame D
2024
M.S.
Simulation of crossing flames in a periodic domain
2022
M.S. Mechanical and Aerospace Engineering
NASA ZBOT modeling: CFD modeling and validation
Raytheon Technologies
2022
M.S. Mechanical and Aerospace Engineering
NASA ZBOT modeling: mesh analysis
Virgin Galactic
2026
B.S. Aerospace Engineering
Bubble dynamics in the anterior eye during phacoemulsification
2026
B.S. Computer Science and Engineering
Open-source data visualization tool: visualizing numerical data on an interactive map
2026
B.S. Aerospace Engineering
Automated thermochemistry-to-CFD coupling for liquid propellant rocket nozzle flows
2025
B.S. Mechanical Engineering
Computational fluid dynamic baseline analysis for a hybrid attic ventilation system
P2S (HVAC)
2025
B.S. Mechanical Engineering
Integrated performance and flow analysis of a molten carbonate fuel cell tri-generation system
Quality Engineer, ADC Aerospace
2024
B.S. Mechanical Engineering
Investigation of rotating robots inside the body (with Tim Colonius, Caltech)
Design Engineer, United Semiconductors
2024
B.S. Mechanical Engineering
Damage mechanisms associated with rotating equipment in renewable fuels refineries
Marathon Oil
2022
B.S. Aerospace Engineering
Application of RANS closures to modeling a multi-inlet vortex reactor
Millennium Space Systems
2024
Independent study
2024
B.S.
Sandia flame D
Graduate student, USC
2024
B.S.
Modeling of polydisperse sprays
NASA
2023
B.S.
Hydrogen: future clean and sustainable energy
Quality Engineer, PCC
2023
B.S.
NASA ZBOT modeling: validation and data visualization
Graduate student, Texas A&M
2022
B.S. Mechanical Engineering
NASA ZBOT modeling: data visualization and report writing
2022
B.S. Mechanical Engineering
Studies on confined impinging jet reactors
2022
B.S. Aerospace Engineering
Droplet modeling near solid surfaces
Graduate student, USC
2022
B.S. Mechanical Engineering
Boeing
2022
B.S. Mechanical Engineering
Geometry analysis and design for impinging and vortex reactors
U.S. Navy
2022
B.S. Mechanical Engineering
Graduate student, CSULB
2022
B.S. Biology (OURS Program)
2022
B.S. Mechanical Engineering (OURS Program)
2022
B.S. Mechanical Engineering and B.A. Physics
NASA ZBOT modeling: geometry analysis
Rivian Automotive
Bachelor's thesis students from HEPIA, University of Applied Sciences and Arts Western Switzerland, Geneva, co-supervised with Prof. Roberto Putzu as part of our collaboration with HEPIA.
2026
HEPIA, Geneva
CFD-based assessment of subsonic transition and FADS performance for glider wing deployment
Graded 6/6, avec félicitations du jury
2026
HEPIA, Geneva
CFD characterization of a supersonic FADS for a reentry glider
Graded 6/6, avec félicitations du jury
2024
HEPIA, Geneva
LES modeling of confined impinging jet mixers
2022
HEPIA, Geneva
Transient modeling of a multi-inlet vortex reactor
Graduate student, EPFL